Oil and Gas Industry Rubber Products
|
We offer a wide range of Oil and gas industry rubber products.
|
 | Accumulator Bladders | | |
The Hydro Pneumatic Accumulator is a device designed specifically for the storage of the liquid under pressure. For this purpose Accumulator Bladders are use which provide an affordable means of enhancing the performance of the hydraulic system. They are suitable for storing energy under pressure, absorbing hydraulic shocks and dampening pump pulsation and flow fluctuation. As liquids are, for all the practical purpose incompressible, the objective is achieved by utilizing the compressibility of the gases. The quality of the Accumulator Bladder is that they operate efficiently with regards to maximum working pressure, temperature range and capacity in litres.
We manufacturer Bladders having pressure ratings of 100kg/cm² to 128 kg/cm². They are used in condensate, Glycol recirculation pumps, life boats, Bildge pumps etc. (DMW ( Union Pumps F Peroni etc.)
Our Bladders made of Viton Rubber are used as pulsation dampener used in glycol reciprocating pumps which have high content of H2S and have a rating of 1450 psi.
They are also available in Nitrile, Butyl, Neoprene and EPDM.
Sizes and dimensions are made to order
All Bladders are designed to sustain a pressure rating of min. 100Kg/cm²
SIZES AND TYPES AVAILABLE
| Sr. No. | Name | Capacity | Materials | | 1 | Accumulator Bladder Peroni | 2.0 Litres | Nitrile / Neoprene | | 2 | Accumulator Bladder Life Boat | 4.5 Litres | Nitrile / Neoprene | | 3 | Accumulator Bladder Peroni | 3.0 Litres | Nitrile / Neoprene | | 4 | Accumulator Bladder F Peroni | 6.2 Litres | Viton | | 5 | Accumulator Bladder Bush Type | 2.0 Litres | Nitrile / Neoprene | | 6 | Accumulator Bladder Discharge Small | 6.2 Litres | Nitrile / Neoprene | | 7 | Accumulator Bladder Discharge Big | 8.0 Litres | Nitrile / Neoprene | | 8 | Accumulator Bladder Peroni | 8.0 Litres | |
|
|
| Telescopic Joint Packer | | |
| split / solid type for riser system |
|
| Packer Elements | | |
IRPC Packer elements are manufactured from special elastomer / rubber compounds using cutting edge molding methods. The Packer Element compound must be able to withstand very hostile environments and produce the required isolation in Oil wells. When Packer Elements are manufactured with the right materials and installed properly, the tools should perform at its best.
IRPC Packer Elements manufactured by stay in Oil Wells for long periods of service and after they are retrived, they look as if they could still function for a very long time .
IRPC Packer Elements are proven to give the desired results when they are inserted on packers and put into the most hostile well environments.
IRPC Packers and other components will fit to most manufacturer's packers, bridge plugs, tubing anchors etc.
Ther are manufactures in HNBR/NBR Elastomer
|
|
| PU Rotors | | |
| Dampener | | |
| We offer intensive dampeners for the use of dampening grain. We provide intensive dampener that requires less maintenance and cleanliness. To ensure the long working life of intensive dampeners, we use high quality steel which fabricates the dampeners. |
|
| Stripper Rubber Head | | |
IRPC supplies all types of stripper rubber heads that are used in a rubber disk surrounding drill pipe or tubing that removes mud as the pipe is brought out of the hole in the oil fileds
|
|
| Desander Cones | | |
| No. | Description for 10", 16 or 20" | Cone Desilters | Part No. | | 1 | 4" Inlet | KTH-4-001 | MRT 1102/108 | | 2 | 4" Body | KTH-4-002 | MRT 1102/107 | | 3 | Apex Nut | KTH-4-003 | MRT 1102/106 | | 4 | Apex Wear Insert | KTH-4-004 | MRT 1102/109 | | 5 | Stainless Steel Clamp | KTH-4-005 | MRT 1102/110 | | 6 | 2" Groove Lock Overflow Elbow | KTH-GL-203 | MRT 1102/192 | |
|
| Airo Union Clamps | | |
We offer high quality unions, clamp fitings & flanges
|
|
| Flat Wiper | | |
| Wiper are special class of seal normally employed for their wiping & scraping action in conjunction with sliding or reciprocating motion rather than as seals and such, although they may provide and effective sealing action. Their normal application is to remove dust, dirt and similar articles from a surface passing under the wiper and thus provide protection for interior surface of a machine. |
|
| Heater Exchanger Gaskets | | |
| We offer our clients high quality Heat Exchanger Gaskets that are fabricated using advanced technology and quality material as per OEM specifications. Our range is appreciated for exceptional chemical and thermal resistance properties and are extensively used to avoid any leakage under compression in oil & gas industry. |
|
| Thread Protectors | | |
The Thread Protectors are designed to provide protection to the connections during handling and transportation, and to prevent debris from entering the threads and tube body. The threads are made in such a manner that they cover all the threads of the connections and prevent the thread protector from stripping or vibrating loose. Our thread protectors are made of Nitrile Rubber having high tensile, self lubricating, high temperature & oil resistant properties, upto 90f+5˚A hardness. The rubber material used makes it lighter and rust free compared to metallic protectors.
Left and right hand threads as per customer's requirements are made.
We can develope Thread Protectors of any given size. SIZES AND THREAD TYPES AVAILABLE
| Sr. No. | Size | Thread Type | Type | | 1 | 1" 00 | AMMT | Box and Pin | | 2 | 1" 1/4 | AMMT | Box and Pin | | 3 | 1" 1/2 | AMMT | Box and Pin | | 4 | 2" 3/8 | REG/IF/EUE/PAC | Box and Pin | | 5 | 2" 7/8 | REG/IF/EUE/PAC/HT PAC/PH-6 | Box and Pin | | 6 | 3" 1/2 | REG/IF/EUE/PAC-6/NEW VAM | Box and Pin | |
|
| Hydro Cyclo Cones | | |
Hydro Cyclone Cones are basically to separate liquid from earth. During suction it is very critical to have a system that will operate efficiently.
We manufacturer Hydro Cyclone Cone Assemblies i.e. Desanders and Desilters. The separation process is carried out by employing centrifugal forces. The angle of the fluid entry has been specifically designed to facilitate the flow and separation. The Cones are made of high durameter polyurethane with optional steel inserts, which ensure consistent productivity.
Desander Cones remove abrasive, coarse solid particles upto 60 microns.
Desander Cones are available in 10" attachments with a 4" inlet and a 6" outlet.
Desilter Cones remove fine sand and silt down to 20 microns.
Desilter Cones are available of 4" size that have a 2" inlet and a 2" outlet. |
|
| Hydro Cones Assembly | | |
| Hydro Cyclone Cones are basically to separate liquid from earth. During suction it is very critical to have a system that will operate efficiently.
We manufacturer Hydro Cyclone Cone Assemblies i.e. Desanders and Desilters. The separation process is carried out by employing centrifugal forces. The angle of the fluid entry has been specifically designed to facilitate the flow and separation. The Cones are made of high durameter polyurethane with optional steel inserts, which ensure consistent productivity.
Desander Cones remove abrasive, coarse solid particles upto 60 microns.
Desander Cones are available in 10" attachments with a 4" inlet and a 6" outlet.
Desilter Cones remove fine sand and silt down to 20 microns.
Desilter Cones are available of 4" size that have a 2" inlet and a 2" outlet. | | | |
|
| Polyurethane and Scrapper | | |
| Polyurethane is a unique material that offers the elasticity of rubber combined with the toughness and durability of metal. Because urethane is available in a very broad hardness range (eraser-soft to bowling-ball-hard), it allows the engineer to replace rubber, plastic and metal with the ultimate in abrasion resistance and physical properties. Polyurethane can reduce plant maintenance and OEM product cost. Many applications using this ultra-tough material have cut down-time, maintenance time and cost of parts. | 
|
| Silicon Expansion Joint | | |
IRPC Silicon expansion joints are used in turbines used for high temperature appliancations in oil and gas industry
They are resistant to temperatures upto 200 C |
|
| Aqua Shear Nozzles | | |
IRPC AQUA SHEAR NOZZLES are shearing devices used in cementing pumps in oil and gas industry
They come in varied sizes as per customers requirements |
|
| Rubber Packings For Bridge/ Composite Plugs | | |
IRPC Manufactures and supplies high quality rubber packings for composite/bridge plugs to all the leading downhole Oil tool companies in variety of sizes at competetive prices
These packings are manufactured in NBR/HNBR/FKM elastmer depending on customer's requirement
|
|
| Hydro Cyclone Cone Assembly | | |
Hydro Cyclone Cones are basically to separate liquid from earth. During suction it is very critical to have a system that will operate efficiently.
We manufacturer Hydro Cyclone Cone Assemblies i.e. Desanders and Desilters. The separation process is carried out by employing centrifugal forces. The angle of the fluid entry has been specifically designed to facilitate the flow and separation. The Cones are made of high durameter polyurethane with optional steel inserts, which ensure consistent productivity. Kem-tron Desilter Cones
We have the following cones in our Ex-stock range : Kem-tron KTL48B Shaker | Desander Cones | remove abrasive, coarse solid particles upto 60 microns. | | Desander Cones | are available in 10" attachments with a 4" inlet and a 6" outlet. | | Desilter Cones | remove fine sand and silt down to 20 microns. | | Desilter Cones | are available of 4" size that have a 2" inlet and a 2" outlet. | |
|
| CONVENTIONAL PACKER ELEMENT | | |
There cant be a better source for conventional packer elements than IRPC
IRPC Conventional packer elements are manufactured using the most advanced technology and supplied to all the leading downhole oiltool companies
HNBR/NBR Elastomer is bonded to C40/Aluminium/MS in these elements
|
|
| Orifice Flexible Rubber Plugs For Downhole Oil Tool | | |
IRPC Manufactures and supplies a wide range of orifice rubber plugs to downhole oil tools in sizes ranging from 1" to 9-5/8"
These are manufactured in NBR/HNBR/VITON Rubber with Aluminium/steel inserts
|
|
| OIL SAVERS | | |
IRPC OIL SAVERS are made from specially formaulated rubber compounds which are both tough and durable and they are oil,gas and abrasion resistant for long service life
Oil savers remove oil and other fluids from the wireline and allowed to re-enter the well which prevents potential well-site contamination
IRPC Oil savers are supplied in different colours as per customer's requirement and in hardness ranging from Shore A 35-55
| HSPC DESCRIPTION | Replacement rubber for OEM Units | | TYPE H 3/8”-5/8” | Guiberson Type H | | TYPE H 3/8”-5/8” Soft | Guiberson Type H | | TYPE H 3/8”-5/8” Soft | Guiberson Type H |
|
|
| Tubing Stripper Rubbers Ju Type | | |
IRPC Tubing stripper rubbers are made from a specially formulated oil and abrasion resistant rubber
Tubing can be pulled or run in with pressure still on well while also stripping fluids off the tubing OD to provide a cleaner job site
| NOMINAL SIZE | Replacement rubber for OEM Units | | 2.375 | Guiberson Type JU&JUS | | 2.875 | Guiberson Type JU&JUS | | 3.500 | Guiberson Type JU&JUS |
|
|
| Drill Pipe Wipers | | |
| Drill Pipe Wipers are made of specially designed rubber compound having tremendous resistance to cutting, tearing and abrasion. They are available for water based and oil b ased drilling mud. Designed for application to Drill Pipe where a solid master bushing is used.
We manufacture both Dual Split and Single Solid Type of Drill Pipe Wipers.
Dual wipers are made with a spring steel reinforced ring. The split in the dual wipers allows are wiper to be threaded easily onto the pipe.
Single Solid Wipers have a series of concentric rings moulded around the inner wiping surface. Each ring carries a specific size, identifying the area of the center hold to be cut out for a specific drill pipe size. | | | | SIZES AND TYPES AVAILABLE | | | | | | | | Sr. No. | Size | Type | Bore Size | Material | | 1 | 9" | Low Profile | 2" 3/8 | Natural rubber / Nitrile | | 2 | 12" | Low Profile | 2" 3/8 | Natural rubber / Nitrile | | 3 | 14" | Low Profile | 2" 3/8 | Natural rubber / Nitrile | | 4 | 14" 3/4 | Flat / Solid | 2" 3/8, 2" 7/8, 3" 1/2, 5" | Natural rubber / Nitrile | | 5 | 17" | Flat / Solid / Dual Split | 2" 3/8, 2" 7/8, 3" 1/2, 5" | Natural rubber / Nitrile | | 6 | 19" | Flat / Solid / Dual Split | 2" 3/8, 2" 7/8, 3" 1/2, 5" | Natural rubber / Nitrile | | 7 | 19" | Split Tubing Flapper | 95 mm / 100 mm | Natural rubber / Nitrile | | 8 | 21" | Flat / Solid / Dual Split | 2" 3/8, 2" 7/8, 3" 1/2, 5" | Natural rubber / Nitrile | | 9 | 26" | Flat / Solid | 2" 3/8, 2" 7/8, 3" 1/2, 5" | Natural rubber / Nitrile | | |
|
| BJ Type Diverter Valve Packers | | |
BJ Type Diverter Valve Packers are made in different sizes i.e. 40" Dia x 6" Ht. and 40" Dia x 14" Ht. Rubber Packers are with steel rings moulded at the bottom of each side. These are used in Diverter Valve Packers with a pressure rating of 150 psi. They are made of Nitrile Rubber of 70+/-5° A hardness.
Split/Solid Type Packers are made of approx. 26" Dia x 14" Ht. They are used in Riser Tensioner Systems mostly used of Floaters. They come in Split as well as Solid Type. Their pressure rating is 150 psi. They are made of Nitrile Rubber of 70+ / -5° A Hardness bonded with steel rings and 2 'O' Rings for proper sealing.
|
|
| Bell Nipples | | |
| Bell nipples are tubeless seals size 40" x ¾" having a pressure rating of 150 psi. These are used on the Bell Nipple Housing to hold the pipes in their place. Once pressurized, they grip the housing pipes in its place. They are tested of 225 psi. They are made of Nitrile Rubber (Oil-Resistant) with Brass Nipple at one end. |
|
| Rubber Clamping Block For Bop Hydraulic Hoses | | |
| Rubber Clamping Block are used for clamping of BOP Hydrualic Hoses of different sizes. They are used for clamping of 5 different of hoses starting from 53 mm to 70 mm. The clamps/blocks are made of rubber bonded with galvanized steel plates and an eyebook at one end of the block. They are made of specialy formulated Natural Rubber, which is Abrasion Resistant. We can make these clamping blocks according to your specifications. |
|
| Arrow Union Seals | | |
Arrow Union Seals are constructed of an inflatable oil-resistant (Nitrile) tube. They are used for mud suction return lines and low pressure fluid lines. When they are inflated through an automotive type air-valve, it seals the union. For effective sealing the fuel pressure should exceed the line pressure by 50 psi. MARG INC. Arrow Union Seals make up fast and easily without close line up. This allow pipe expansion and proper alignmetn without breaking the Seal. The Seal can be broken by deflating the tube.
|
|
| Rod Wipers | | |
IRPC ROD WIPERS aid in keeping hydracarbon seepageto a minimum while uner pressure
They clean rods of excessive oil and waxes to provide a safer working environment
SIZE:5.15"0D 0.609"ID
BJ EQUIVALENT
| HSPC EQUIVALENT | Normal size | Replacement rubber for OEM Units | | BJ-5/8 | .612 | BJ Type Rod wiper | | BJ-3/4 | .750 | BJ Type Rod wiper | | BJ-7/8 | .875 | BJ Type Rod wiper | | BJ-1 | 1.000 | BJ Type Rod wiper |
|
|
|
 Product
Showcase View all our products / services as a slide show. play now
|
